 |
The RGA300CA is a high-performance MEMS gyro and
triaxial accelerometer subsystem. It is an ideal solution for land
vehicles where the majority of the motion control occurs on the
yaw rate axis. The unit is compensated for static errors using an
on-board DSP processor.
Outputs are available in both analog and digital (RS-232) formats.
Data is available in a polled mode or continuously at a fixed rate
of over 100Hz. No recalibration of the unit is required, and it is
designed for a long service-free operating life.
下载资料 |
|
 |
The IMU300CC is an intelligent sixdegree-of-freedom
(6DOF) Inertial System designed for general measurement of linear
acceleration and angular rate in dynamic environments.
The IMU300CC uses a high performance Digital Signal Processor to
provide outputs that are compensated for deterministic error
sources within the unit. Internal compensation includes offset,
scale factor, and alignment.
下载资料 |
|
 |
The IMU400CC is a high performance solid-state
six-degree-of-freedom (6DOF) Inertial Package intended for OEM
Navigation and Control, dynamics testing and instrumentation
applications. This high reliability strap-down inertial system
provides accurate measurement of angular rate and linear
acceleration. The IMU400CC series product builds on the
performance of the IMU400CB series.
下载资料 |
|
 |
The VG400CC is a high performance, solid-state vertical gyro
intended for airborne applications such as UAV control, Avionics,
and Platform Stabilization. This high reliability,strap-down
inertial system provides attitude measurement with static and
dynamic accuracy that exceeds traditional spinning mass vertical
gyros. This VG400CC series product builds on the performance of
the VG400CB series.
下载资料 |
|
 |
The Crossbow VG700AA is designed specifically for automotive test applications.It combines Crossbow's second generation high
performance fiber optic gyros with the latest in silicon
micro-machined (MEMS) accelerometer technology to provide a highly
accurate dual function Vertical Gyro (VG) and Inertial Measurement
Unit. The new second generation FOG sensor provides excellent bias
stability of <20°/hr (constant temp.) and low noise.
下载资料 |
|
 |
The VG700CA is an intelligent vertical gyro for measuring roll and
pitch angles in dynamic environments. The VG700CA uses Crossbow’s
second generation Fiber Optic Rate Gyro technology resulting in
superior performance, reliability, and stability over time. The
new second generation FOG sensor provides excellent in-run bias
stability of <20°/hr (constant temp.) and low noise.
下载资料 |
|
 |
The Crossbow AHRS400CC is a high performance, solid-state attitude
and heading reference system intended for airborne applications
such as UAV control, Avionics, and Platform Stabilization.
This high reliability,strap-down inertial subsystem provides
attitude and heading
measurements with static and dynamic accuracy that exceeds
traditional spinning mass vertical and directional gyros.
下载资料 |
|
 |
The Crossbow AHRS500CA is a high performance, solid-state attitude
and heading reference system intended for aviation applications.
This high reliability, strap-down inertial system provides
attitude and heading measurement with static and
dynamic accuracy superior to traditional spinning mass vertical
and directional gyros.
下载资料 |
|
 |
The AD2012 is a complete standalone data acquisition system,
including a pocket-sized logging unit, Configuration & Analysis
Software and all accessories. The system provides a method for
logging data directly from Crossbow inertial systems. The AD2012
logging unit will operate from a 9 volt battery for up to 3
months.
下载资料 |
|
 |
Crossbow's GYRO-VIEW software is shipped with Crossbow Inertial
Systems products for use on PCs running MS Windows 95/98/00 and NT
4.
GYRO-VIEW provides a convenient way to start system development,
perform data acquisition and evaluate system performance. Download
a free copy from our website.
下载资料 |
|
 |
The CWT100 Wireless Telemetry System consists of two wireless
transceivers, two remote mobile antennae, and other accessories
required to quickly set up an efficient, reliable, wireless
communication link between the IMU (or other Crossbow product) and
a host PC or other fixed data acquisition system. Figure 1 shows a
typical application diagram. Table 1 shows the list of components
included in the kit.
下载资料 |
|
|
|