 |
The CHS110 Sensor is a specialized product designed specifically
for towed sonar array applications. It is small, low power and
designed to replace traditional compass solutions. Unlike compass
solutions, there is no floating gimbal in the CHS110 and no moving
parts. The unit has been tested in latitudes as high as 85
degrees. TOWED SONAR ARRAY HEADING SENSOR
资料下载 |
|
 |
ANALOG 3-AXIS MAGNETOMETER
This analog output magnetometer is a fully signal conditioned
fluxgate sensor with electronics. High level analog outputs offer
easy interface to A/D converters and other data acquisition
systems. Intended for OEM applications, the board can be
customized for specific packaging requirements.
资料下载 |
|
 |
DIGITAL 3-AXIS MAGNETOMETER
As a stand-alone magnetic measurement device, the CXM539 is a
fully self-contained high-speed digital magnetometer with RS-232
output. The device employs three ±1 Gauss full scale fluxgate
magnetometers, three 16-bit A/D sigma delta converters, and a
micro-controller. The unit provides output data in engineering
units (Gauss).
资料下载 |
|
 |
The CXM543 sensor is designed to measure the 3-axis orientation of
a platform or vehicle to which it is attached. The CXM543
determines inclination and roll angles using a 3-axis
accelerometer to measure the direction of earth’s gravity. The
azimuth angle is determined by measuring the earth’s magnetic
field using a 3-axis magnetometer subsystem. HIGH SPEED DIGITAL
ORIENTATION SENSOR
资料下载 |
|
 |
The CXM544 sensor detects the earth’s magnetic field using a
3-axis magnetometer. The sensor computes a continuous measure of
orientation using the 3-axis accelerometer as a gravitational
field reference. The product uses the SoftSensor® architecture to
compensate for temperature drift, alignment, and other errors. The
CXM544 finds application in oil well logging, marine systems, and
magnetic compassing.
MICRO ORIENTATION SENSOR
资料下载 |
|
|
|