首页 公司简介 产品展台 开发生产 资料下载 技术支持 解决方案 展会消息
代理经销 集成电路 高频微波 消费电子 工控网络 安防报警 光纤光电 汽车电子
合作交流 留言本 友情连接 热卖产品 销售网络 招聘加盟 新品介绍 联系我们
传感器/变送器/仪表按厂商品牌选用指南按种类分类选用指南按行业应用选用指南 模块模组 隔离/采集/采集器/数据采集系统
产品资料 技术资料 样例工程 产品驱动 参考设计 应用电路 通讯协议 使用说明 支持软件 数据查询 问题解答 标准法规 图书资料 基础知识

SSTKJ气体传感器/气敏元件/气体变送器/气体报警器/气体模块

以产品原理分类导航|以应用领域分类导航|以测试对象分类导航|以气体厂家品牌分类导航|按气体分子式分类|按气体类型分类| 气体模块模组气体检测仪气体仪器设备应用领域与气体信息关联表|

费加罗Figaro
根本化NEMOTO
FIS
城市气体CITY
IT
SENSORIC
Alphasense
Membrapor
RAE
森斯特
Dittrich
国产
DCS
VTI
SENSORS
爱丁堡
霍尼韦尔Honeywell
神荣SHINYEI
E2V
GE
SMARTGAS
MSI
MEAS
电化学传感器工作指南及电路图工作电路图及尺寸图
催化燃烧式传感器工作原理毒气传感器
毒气传感器工作原理
红外传感器工作原理
电化学传感器技术条件/名词释义
氧传感器工作指南
氧气传感器工作原理
美国Teledyne选型资料 美国Teledyne资料下载 美国Teledyne图文介绍 美国Teledyne应用
美国Teledyne资料1 美国Teledyne资料2 美国Teledyne资料3 美国Teledyne资料4
Industrial Sensors
sensor selection / sensor storage / acid gas effects / o2 sensing technologies / hc sensing technologies
 

 
Application overview

 
RANGE
BACKGROUND GAS
TELEDYNE INSTRUMENTS
SENSOR OPTIONS
Trace Less than 1000 ppm CO2 in the background gas 311, 316, 317, 318, 3160 B-2C
3000T series L-2C
More than 1000 ppm up to 100% CO2 in the background gas All trace oxygen instruments A-2C
Note: To use the A-2C or B-2C sensor in a 3000T series instrument, adapter part number B66378 is required.
Note: The L-2C sensor cannot be used in our older analog models (300 series).
Percent Less than 1000 ppm CO2 in the background gas 311P, 320A / P / BRC, 326, 327, 328 B-1, B-3 standard;
C-3 for high concentration of O2
More than 1000 ppm up to 100% CO2 in the background gas A-5


Selecting a Teledyne Oxygen Sensor - Detail

 
CLASS
(click for spec control drwg.)
PART No. APPLICATION COMMENTS
A-1
oxygen sensor
C6689-A1 Ultra-fast response (90% in less than 4 seconds) in the percent oxygen region. Use only when B-1 response time is insufficient.
A-2C
oxygen sensor
C6689-A2C Used for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
A-2CXL
oxygen sensor
B74033-A2CXL Specially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
        A-2Cl: Obsolete, use A-2C
        A-3: Obsolete, use A-5
A-5
oxygen sensor
C6689-A5 Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0-100% CO2. 90% response is time is 45 seconds. Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration.
B-1
oxygen sensor
C6689-B1 General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds). Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas.
B-2C
oxygen sensor
C6689-B2C General purpose trace O2 analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm. May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.
INSTA TRACE
oxygen sensor
B71875 Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Low range limit is 0-10 ppm. Used for trace O2 analysis in inert gas and hydrocarbon streams.
B-2CXL
oxygen sensor
C6689-B2CXL Specially qualified B-2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm. May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.
B-3
oxygen sensor
C6689-B3 Percent O2 analysis, best compromise between long life and fast response. May be used to spot check flue gas.
B-4C
oxygen sensor
C14613-B4C Trace O2 cell specifically designed for the Model 317EXI. Same performance as the B-2.
B-5
oxygen sensor
C45091-B5 Special application cell (non-standard) where long life and moderately fast response are required; B-5 has a factor of 3x the life of a B-3. Requires 3x the amplifier gain of the B-3. Expected life is 36 months in air.
B-5F
oxygen sensor
C45091-B5F Special application cell (non-standard) where long life and moderately fast response, in the presence of CO2, are required. Uses Type F (acid electrolyte). Requires higher amplifier gain than normal. 90% response time is 13 seconds. Expected life in air is 6 months.
B-7
oxygen sensor
C45091-B7 Special application cell (non-standard) where fast response is required; the B-7 has a factor of 3x the life of a B-1 cell. Requires 3x the amplifier gain of the B-1. Expected life in air is 24 months.
B-7F
oxygen sensor
C45091-B7F Special application cell (non-standard) where moderate life and fast response, in the presence of CO2, are required. Requires higher amplifier gain than normal. 90% response time is 7 seconds. Expected life in air is 3 months.
C-1
oxygen sensor
C6689-C1 Rarely used. Schematic for reference only.
C-2
oxygen sensor
C6689-C2 Rarely used. Schematic for reference only.
C-3
oxygen sensor
C6689-C3 Percent O2 measurements where maximum cell life is desired (high O2 applications). 90% response time is 30 seconds. Expected life in air is 18 months.
C-5
oxygen sensor
C45091-C5 Special application cell (non-standard) where long life is required; the C-5 has a factor of 3x the life of a C-3 cell. Requires 3x the amplifier gain of the C-3. Expected life in air is 54 months.
C-5F
oxygen sensor
C45091-C5F Special application cell (non-standard) where long life, in the presence of CO2, is required. Requires higher amplifier gain than normal. 90% response time is 30 seconds. Expected life in air is 9 months.
C-6
oxygen sensor
C54090-C6 Motion insensitive percent O2 measurements for use in hand held portable monitors. Best cell for OEM safety applications.
E-1
oxygen sensor
C14991-E1 Special cell with performance characteristic of the C-3 with 5x the life. Cell is 2 to 3 times the length of standard MFCs; requires special mounting. Designed for medical oxygen concentrators.
E-2
oxygen sensor
C57283-E2 Long life cell for use is the Model 3290 (for use in unattended air liquefaction nitrogen skids). Has a 3 to 4 years expected life in air. Minimum range 0-1000 ppm.
F-1R C40371-F1R 0-1000 ppm CO in Air Used in Max 5 and 9950 Portable Combustion Analyzers
F-3 C55194-F3 Rarely used. Schematic for reference only.
INSTA TRACE - CO2 B73016 Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Used for trace O2 measurements in CO2 containing backgrounds (0-100% CO2) in the 3000T analyzer series. Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present. The INSTA TRACE Micro-fuel Cell oxygen sensor is capable of measuring below 1 ppm of oxygen within 15 minutes of installation.
INSTA TRACE - XL
oxygen sensor
B73592 Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Specially qualified sensor to operate in XL model analyzers with a low range limit of 0-1 ppm. Used for trace O2 analysis in inert gas and hydrocarbon streams.
K-1
oxygen sensor
C43832-K1 Smallest Micro-fuel Cell, for use in applications where small size or multiple sensing requirements exist. OEM applications; PC board mountable.
        K-2: Obsolete
L-2C
oxygen sensor
C6689-L2C Used for general purpose trace oxygen analysis in the 3000T analyzer series. Has a 2 year expected life.
L-2CI
oxygen sensor
C6689-L2CI Used in the Model 3000T series for trace O2 measurements; use only in CO2 and H2 background mixtures (e.g. inert gas generators). CO2 concentration should be within +/-20% about some nominal concentration.
S-2C
oxygen sensor
C6689-S2C Trace oxygen cell for use in TurbO2 analyzer. Provides rapid recovery from air calibration (approximately 20 minutes). Low range limit is 0-100 ppm. Has three pin contact system.
Z-2C
oxygen sensor
C6689-Z2C Has the same features as the S-2, except configured for use in the Model 3190. Low range limit is 0-100 ppm. Has normal Micro-fuel Cell contact plate.


Storage Recommendations for Micro-Fuel Cells

After the Micro-fuel Cell barrier bag is sealed, the sensor (cell) continues to react with the oxygen inside the bag.

Eventually, all of the oxygen is consumed and the cell remains in an inert oxygen-free atmosphere until the bag is opened.

The barrier bag transmits negligible amounts of oxygen and other gases, and almost no moisture. Thus the cell can be stored for periods up to 6 months and still provide 90% or better of its expected life when finally placed into use.

Loss of sensor life in storage can be minimized by following a number of practical stocking procedures.


1) Never remove the cell from the barrier bag until the cell is ready to be used.

2) Store the sealed cell in a cool storage chamber. Storage temperature can be room temperature or below. A range of 10 to 22 Celsius is satisfactory.

3) Avoid any prolonged storage in warm or dry environments. Do not store the cells in an area that is exposed to direct sunlight.

4) Maintain careful records of the serial numbers for cells put into stock and for those supplied out of stock. Cells should be supplied from stock on a first-in, first-out basis.

5) Schedule stock cell orders to coincide with the expected need and thereby minimize cell storage periods. Although it is possible to store the cells for reasonably long periods and still maintain cell life, it is advisable to exercise strict discipline in this matter. For instance, set a stock period target of three months. By setting a goal to turn over stock every three months, cell life will be maximized and warranty issues minimized.
 
Medical

 
Oxygen Monitors
AX300 Oxygen Analyzer and MX300 Oxygen Monitor

Click here for complete information about these microprocessor based units specifically designed for the medical industry
See a complete listing of Teledyne's medical industry distributors.


 
Replacement Sensors

C-1R

C-2R

R-13

R-15
Product literature
Schematic

R-17MED
Product literature
Schematic

R-22MED
Product literature
Schematic

R-23

R-24
Schematic

R-29MED

R-30MED
Schematic

R-31MED
Schematic

R-32MED
Schematic

R-34MED
Schematic

R-36
Schematic

T-1
Schematic

T-2
Schematic

T-4
Schematic

T-7
Product literature
Schematic

氧气传感器 便携式氧分析仪 在线氧气分析仪 氢分析仪 医用氧气浓度监测仪 Teledyne 分析仪备件

产品图片 产品名称/型号 产品简单介绍
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 class B-2C
Teledyne class B-2C
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 A-2C
Teledyne A-2C
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 A-5
Teledyne A-5
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 B-1
Teledyne B-1
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 B-2CXL
Teledyne B-2CXL
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 B-3
Teledyne B-3
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 class L-2C
Teledyne class L-2C
C06689-L2C class L-2C
Teledyne 氧分析仪传感器 insta trace
Teledyne insta trace
Teledyne  氧气浓度监护仪电池  R-15 Teledyne   R-15
Teledyne 氧气浓度监护仪电池 R-15
Teledyne R-15
Teledyne   氧浓度检测仪电池  R-17MED Teledyne    R-17MED
Teledyne 氧浓度检测仪电池 R-17MED
Teledyne R-17MED
Teledyne  氧气浓度检测仪电池  R-22MED  Teledyne  R-22MED
Teledyne 氧气浓度检测仪电池 R-22MED
Teledyne R-22MED
Teledyne  氧气浓度检测仪电池  R-22MED  Teledyne  R-22MED
Teledyne 氧气浓度检测仪电池 R-22MED
Teledyne R-22MED
Teledyne  氧气浓度监护仪电池 R-24MED Teledyne  R-24MED
Teledyne 氧气浓度监护仪电池 R-24MED
Teledyne R-24MED
Teledyne   氧气浓度监护仪电池 R-23MED Teledyne   R-23MED
Teledyne 氧气浓度监护仪电池 R-23MED
Teledyne R-23MED
Teledyne  氧电池 T-7 Teledyne   T-7
Teledyne 氧电池 T-7
Teledyne T-7
Teledyne  氧电池 R-13 Teledyne  R-13
Teledyne 氧电池 R-13
Teledyne R-13
Teledyne  氧气浓度检测仪电池  R-22MED  Teledyne  R-22MED
Teledyne 氧电池 R-13
Teledyne R-13
Teledyne 氧传感器(氧电池) Teledyne
Teledyne 氧电池 R-30MED
Teledyne R-30MED
Teledyne 氧传感器(氧电池) Teledyne
Teledyne 氧传感器(氧电池)
Teledyne
teledyne C06689-B2C C06689-B2C
teledyne C06689-B2C
C06689-B2C
产品图片 产品名称/型号 产品简单介绍
C06689-L2C class L-2C
C06689-L2C
class L-2C
美国Teledyne 311便携式氧分析仪 Teledyne 311
3110 便携式氧分析仪
Teledyne 3110
美国Teledyne 311便携式氧分析仪 Teledyne 311
311PC 便携式氧分析仪
Teledyne 311PC
美国Teledyne 311便携式氧分析仪 Teledyne 311
311TCXL 便携式微量氧分析仪
Teledyne 311TCXL
美国Teledyne 311便携式氧分析仪 Teledyne 311
311TC便携式微量氧分析
Teledyne 311TC
美国Teledyne 311便携式氧分析仪 Teledyne 311
311便携式氧分析仪
Teledyne 311
美国Teledyne 311便携式氧分析仪 Teledyne 311
美国Teledyne 311便携式氧分析仪
Teledyne 311
美国Teledyne 311便携式氧分析仪 Teledyne 311
Ultrace3000 痕量氧分析仪
Teledyne Ultrace 3000
美国Teledyne 311便携式氧分析仪 Teledyne 311
Insta Trans 氧变送器
Teledyne Insta Trans
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000MB 磁氧分析仪
Teledyne 3000MB
美国Teledyne 311便携式氧分析仪 Teledyne 311
3020M 防爆磁氧分析仪
Teledyne 3020M
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000MA 磁氧分析仪
Teledyne 3000MA
美国Teledyne 311便携式氧分析仪 Teledyne 311
3020P 防爆百分量氧分析仪
Teledyne 3020P
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000PA 百分量氧分析仪
Teledyne 3000PA
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000PB 百分量氧分析仪
Teledyne 3000PB
美国Teledyne 311便携式氧分析仪 Teledyne 311
3010PA 百分量氧分析仪
Teledyne 3010PA
美国Teledyne 311便携式氧分析仪 Teledyne 311
3020T微量氧分析仪
Teledyne 3020T
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000ZA-XL微量氧分析仪
Teledyne 3000ZA-XL
美国Teledyne 311便携式氧分析仪 Teledyne 311
3010TB微量氧分析仪
Teledyne 3010TB
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000TB微量氧分析仪
Teledyne 3000TB
产品图片 产品名称/型号 产品简单介绍
美国Teledyne 311便携式氧分析仪 Teledyne 311
3000TA-XL微量氧分析仪
Teledyne 3000TA-XL
美国Teledyne 311便携式氧分析仪 Teledyne 311
3010TA微量氧分析仪
Teledyne 3010TA
Teledyne微量氧分析仪3000TA Teledyne 3000TA
Teledyne微量氧分析仪3000TA
Teledyne 3000TA
美国Teledyne 311便携式氧分析仪 Teledyne 311
2020 氢分析仪
Teledyne 2020
美国Teledyne 311便携式氧分析仪 Teledyne 311
2000A 氢分析仪
Teledyne 2000A
MX300医用氧气浓度监护仪 Teledyne  Mx300
MX300医用氧气浓度监护仪
Teledyne Mx300
AX300医用氧气浓度检测仪  Teledyne  Ax300
AX300医用氧气浓度检测仪
Teledyne Ax300
Teledyne  分析仪备件 Teledyne
Teledyne 分析仪备件
Teledyne

日本Figaro气体传感器选型  日本NEMOTO气体传感器  日本FIS气体传感器  英国CITY城市气体   CITY公司/IT公司/SENSORIC公司气体传感器选购指南  英国Alphasense气体传感器选型  瑞士Membrapor气体传感器选型  德国IT公司气体传感器选购资料  德国SENSORIC公司气体传感器  RAE气体传感器气体检测仪  意大利森斯特传感器  Dittrich气体产品  国产气体传感器选型  DCS公司红外产品 VTI公司红外产品 SENSORS公司红外热导产品 爱丁堡公司红外产品Honeywell传感器  SHINYEI传感器  E2V传感器 GE传感器SMARTGAS传感器MSI传感器MEAS传感器 英国SSC气体检测 宝亚呼吸防护设备 Dynament气体传感器德国Schutz NDIR 红外气体传感器美国MAXTEC产品  美国Teledyne气体分析仪及氧传感器  美国AMI氧分析仪及传感器  美国AII氧分析仪传感器
 

电化学气体传感器 半导体气体传感器 催化燃烧式气体传感器 固体电解质气体传感器 热传导式气体传感器 红外气体传感器 离子烟雾传感器 机动车用气体传感器 气体变送器/检测仪 O2氧气传感器专场 CO2二氧化碳传感器专场 CH4甲烷传感器专场粉尘传感器/灰尘传感 室内空气质量监测控制 温湿度监测控制 医疗设备用传感器   红外气体分析元件1 红外气体分析元件2 红外气体分析元件3  激光红外气体分析元件1 激光红外气体分析元件2 激光红外气体分析元件3 气体变送器模块 BW便携式气体检测仪 BW固定式气体检测仪CO传感 S02传感器H2S传感 NH3传感器 NO传感器 NO2传感器 CH2O传感器 CL2传感 HCL传感器 H2传感器O3传感器C2CL4传感器C2H4传感器 HF传感器 HBR传感 COCL2传感HCN传感器 ASCL3传感 ASF3传感C4H6传感器 CLO2传感器 SIH2CL2传感器 (CH3传感器NH传感器 GeCL4传感 I2传感器 PCL3传感器 SICL4传感器 SO2F2传感器 酒精传感器其它

 

 

更多产品请看本公司产品专用销售网站:欢迎索取免费详细资料、设计指南和光盘 ;产品凡多,未能尽录,欢迎来电查询。

SSTKJ中国传感器科技信息网:http://www.sensor-ic.com/ SSTKJ射频微波光电产品网:HTTP://www.rfoe.net/

SSTKJ电子元器件网:http://www.sunstare.com/SSTKJ工控安防网:http://www.pc-ps.net/

SSTKJ军工产品网:hrrp://www.Junpinic.com/        SSTKJ消费电子产品网://www.icasic.com/

SSTKJ实业科技产品网://www.sunstars.cn/

传感器销售热线:

    地址:深圳市福田区福华路福庆街鸿图大厦9732室

    电话:0755-83376489 83376549 83607652 83370250   83370251  

    传真:0755-83376182  (0)13902971329  MSN: SUNS8888@hotmail.com

    邮编:518033   E-mail:szss20@163.com     QQ: 195847376

    深圳赛格展销部:深圳华强北路赛格电子市场9583号 电话:0755-83665529   13823648918

    技术支持: 0755-83394033 13501568376

    北京分公司:北京海淀区知春路132号中发电子大厦3097   TEL4006579498  18927445855  13823791822  FAX010-62543996 

    上海分公司:上海市北京东路668号上海賽格电子市场地下一层D25号   TEL4006571586  56703037  13823676822  FAX021-56703037

    西安分公司:西安高新开发区20(中国电子科技集团导航技术研究所西安劳动南路88号电子商城二楼D23 

            TEL4006572198  13072977981  FAX:029-77678271