|
更多信息：
PT温度传感器中文介绍手册.pdf
金属铂温度传感器
- 超过4000种明确的温度传感器（RTDs）型号
- 提供标准和客户定制的解决方案
- 提供可选TCR：3750,3770,3850和3911ppm/K
- 温度范围：-200℃ 至 1000℃
- 精确度：最大可达1/10 DIN(+/-0.012%)（远高于AA级）
- 分组和配对电阻值
- 根据客户需求定制导线长度和配置结构
- 方形和圆柱形芯片几何形状，贴片式，卷带式，倒晶（FC）封装和低成本版本。
- 坚固的组装和抗震性
- 为大量和小量应用开发定制的传感器设计
金属镍温度传感器
-
超过4000种明确的温度传感器（RTDs）型号
-
提供标准和客户定制的解决方案
-
提供可选TCR：4000至6720ppm/K
-
温度范围：-60℃ 至
300℃
-
方形和圆柱形芯片几何形状，贴片式，卷带式，倒晶（FC）封装和低成本版本。
-
根据客户需求定制导线长度和配置结构
- 高线性度和灵敏度
-
为大量和小量应用开发定制的传感器设计
TSic 数字传感器集成芯片
- 很高的性价比
- 低电流消耗：工作中为35uA
- 超高精度： 通过“过采样技术”精度最高可达+/-0.07℃
- 温度范围：-50℃ 至 150℃
- 方形和圆柱形芯片几何形状，贴片式，卷带式，倒晶（FC）封装和低成本版本。
- 可以根据客户需求标定（缩小范围来提高精度）
- 数字和模拟温度信号输出
- TO92和SOP-8两种外壳可选
- 裸芯片用于板载芯片技术封装
Products
150 °C Series
200 °C Series
RealProbeTemp
300 °C Series
400 °C Series
600 °C Series
PW Series
PG Series
750 °C Series
850 °C Series
1000 °C Series
SMD Series
FC Series
Performance Data
Platinum temperature sensors
- Over 4000 well-established temperature
sensor (RTDs) variations available as standard
and customer-specific solutions
- Available TCR: 3750, 3770, 3850 and 3911 ppm
/ K
- Temperature range: -200°C to 1000°C
- Accuracy: up to 1/10DIN(+/- 0.012 %)
available
- Grouped and paired resistance
- Custom wire length and configuration
- Square and cylindrical chip geometry,SMD,
tape & reel, flip chip, and low cost versions
- Rugged assembly and vibration resistant
- Development of customized sensor layouts for
both high and low volume applications
150 °C Series (-50 °C to + 150 °C)
Wired RTD Platinum
Sensor
For low temperature applications
200 °C Series (-50 °C to + 200 °C)
Wired RTD Platinum Sensor
For low temperature applications
| Operating
temperature range: |
-50 °C to + 200 °C |
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.15 |
| |
B |
DIN
EN 60751 F0.3 |
| |
C |
DIN
EN 60751 F0.6 |
| |
Y |
DIN
EN 60751 F0.1 |
| Wire: |
Cu/Ag single wire with PTFE |
| |
Cu/Ag stranded wire with PTFE |
| |
Ag wire, Ø 0.25 mm, metalized |
| Alternative wire
contruction: |
Inverted wire
 |
| |
Extended wire (PTFE)
 |
| |
|
|
|
Data
sheet (EN) (PDF 152,0 kB) |
Data
sheet (DE) (PDF 171,0 kB) |
|
(PDF 214,0 kB)Application
note (EN) (PDF 214,0 kB) |
|
|
RealProbeTemp (-50 °C to +200 °C)
RTD Platinum Sensor in
Stainless Steel Probe
For outstanding thermal coupling and probe
assemblies
| Operating
temperature range: |
-50 °C to +200 °C |
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Response time: |
< 1.5 s |
| Tolerance class: |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.15 |
| |
B |
DIN
EN 60751 F0.3 |
| Wire: |
4 x AWG 28/7, CuAg stranded PTFE
insulated wire, 5 mm stripped |
| |
|
|
|
Data
sheet (EN) (PDF 179,0 kB) |
Data sheet (DE) (PDF 197,0 kB) |
|
300 °C Series (-200°C to +300 °C)
Wired RTD Platunum Sensor
For medium temperature applications
| Operating
temperature range: |
-200 °C to +300 °C |
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.15 |
| |
B |
DIN
EN 60751 F0.3 |
| |
C |
DIN
EN 60751 F0.6 |
| |
Y |
DIN
EN 60751 F0.1 |
| Wire: |
Ni wire Au coated, Ø 0.2 mm |
| |
Ni flat wire Au coated, 0.2 x 0.4 mm |
| |
Ag wire, Ø 0.25 mm |
| |
Ni wire, Ø 0.2 mm |
| Alternative wire
construction: |
Perpendicular wire
 |
| |
Inverted wire
|
| |
|
|
|
Data
sheet (EN) (PDF 153,0 kB) |
Data
sheet (DE) (PDF 171,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
|
400 °C Series (-200 °C to +400 °C)
Wired RTD Platinum Sensor
For medium temperature applications
| Operating
temperature range: |
-200 °C to +400 °C |
| Nominal resistance
(Ohm at 0 °C) |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.15 |
| |
B |
DIN
EN 60751 F0.3 |
| |
C |
DIN
EN 60751 F0.6 |
| |
Y |
DIN
EN 60751 F0.1 |
| |
K |
1/5
DIN EN 60751 F0.3 |
| |
K |
1/10 DIN EN 60751 F0.3 |
| Wire: |
Ag wire, Ø 0.25 mm |
| Alternative wire
construction: |
Perpendicular wire
|
| |
Inverted wire
|
| |
|
|
|
Data
sheet (EN) (PDF 153,0 kB) |
Data sheet (DE) (PDF 169,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
|
600 °C Series (-200 °C to +600 °C)
Wired RTD Platinum Sensor
For high temperature applications
PW Series (-200 °C to +600 °C)
Wired RTD Platinum Sensor
For extended operating temperature range in
class A
| Operating
temperature range: |
-200 °C to +600 °C |
|
|
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
|
|
| Characteristics
curve: |
3850 ppm/K |
|
|
| Tolerance class
(dependent on temperature range): |
DIN
EN 60751 F0.15 |
(A) |
-200 °C to +600 °C |
| |
DIN
EN 60751 F0.3 |
(B) |
-200 °C to +600 °C |
| |
DIN
EN 60751 F0.6 |
(C) |
-200 °C to +600 °C |
| |
DIN
EN 60751 F0.1 |
(Y) |
-200 °C to +500 °C |
| |
1/5
DIN EN 60751 F0.3 |
(K) |
-100 °C to +300 °C |
| Wire: |
Pt
wire, Ø 0.2 mm |
|
|
| Alternative wire
construction: |
Inverted wire |
| |
|
| |
|
|
Data
sheet (EN) (PDF 145,0 kB) |
Data sheet (DE) (PDF 166,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
PG Series (-200 °C to +600 °C)
Wired RTD Platinum Sensor
For high accuracy and high temperature
applications with coefficient 3911 ppm/K
| Operating
temperature range: |
-200 °C to +600 °C |
|
|
| Nominal resistance
(Ohm at 0 °C): |
50,
100, 500, 1000 |
|
|
| Characteristics
curve: |
3911 ppm/K |
|
|
| Tolerance class
(dependent on temperature range): |
GOST 8.625-2006 F0.15 |
(A) |
-200 °C to +600 °C |
| |
GOST 8.625-2006 F0.3 |
(B) |
-200 °C to +600 °C |
| |
GOST 8.625-2006 F0.6 |
(C) |
-200 °C to +600 °C |
| |
GOST 8.625-2006 F0.1 |
(Y) |
-200 °C to +500 °C |
| Wire: |
Pt wire, Ø 0.2 mm (-200 °C to +600
°C) |
| |
Pt/Ni clad wire, Ø 0.2 mm (-200 °C
to +400 °C) |
| Alternative wire
construction: |
Inverted wire |
| |
|
| |
|
|
Data
sheet (EN) (PDF 155,0 kB) |
Data sheet (DE) (PDF 171,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
750 °C Series (-200 °C to +750 °C)
Wired RTD Platinum Sensor
For high temperature applications
850 °C Series (-200 °C to +850 °C)
Wired RTD Platinum Sensor
For very high temperature applications
1000 °C Series (-70 °C to +1000 °C)
Wired RTD Platinum Sensor
For extremely high temperature applications
SMD Series (-50 °C to +250 °C)
Platinum RTD Sensor
For surface mounted temperature applications
| Operating
temperature range: |
2P |
-50
°C to +150 °C |
| |
3P |
-50
°C to +250 °C |
| |
4P |
-50
°C to +250 °C |
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.15 |
| |
B |
DIN
EN 60751 F0.3 |
| |
C |
DIN
EN 60751 F0.6 |
| Contacts: |
2P |
tin-coated (96.5Sn/3Ag/0.5Cu) |
| |
3P |
tin-coated (5Sn/93.5Pb/1.5Ag) |
| |
4P |
Ni/Au-coated |
| |
|
|
|
Data
sheet (EN) (PDF 145,0 kB) |
Data sheet (DE) (PDF 164,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
|
FC Series (-50 °C to +600 °C)
RTD Platinum Sensor
For surface mounted temperature applications
| Operating
temperature range: |
1FC |
-50
°C to +150 °C |
| |
2FC |
-50
°C to +250 °C |
| |
3FC |
-50
°C to +250 °C |
| |
5FC |
-50
°C to +400 °C |
| |
6FC |
-50
°C to +600 °C |
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
| Characteristics
curve: |
3850 ppm/K |
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
|
| |
A |
DIN
EN 60751 F0.3 |
| |
B |
DIN
EN 60751 F0.6 |
| Contacts: |
1FC |
tin-coated (96.5Sn/3Ag/0.5Cu) |
| |
2FC |
tin-coated (5Sn/93.5Pb/1.5Ag) |
| |
3FC |
Au-pads |
| |
5FC |
reinforced thin film Pt-pads |
| |
6FC |
thick film Pt-pads |
| |
|
|
|
Data
sheet (EN) (PDF 143,0 kB) |
Data sheet (DE) (PDF 160,0 kB) |
|
Application note (EN) (PDF
214,0 kB) |
|
|
Nickel temperature sensors
- Over 4000 well-established temperature
sensor (RTDs) sensor variations available as
standard and customer-specific solutions
- Available TCR: 4000 to 6720 ppm / K
- Temperature range: -60°C to 300°C
- Square and cylindrical chip geometry, SMD
and Tape & Reel
- High linearity and sensitivity
- Custom wire length and configuration
- Development of customized sensor layouts for
both high and low volume applications
150 °C Series (-60 °C to +150 °C)
Wired RTD Nickel Sensor
For low temperature applications
|
Operating temperature range: |
-60 °C
to +150 °C |
|
|
Nominal
resistance (Ohm at 0 °C): |
100,
500, 1000 |
|
|
|
Characteristics curve: |
Nickel
ND (6180 ppm/K) |
|
|
|
Nickel
NL (5000 ppm/K) |
|
|
|
Nickel
NJ (6370 ppm/K) |
|
|
|
Nickel
NA (6720 ppm/K) |
|
|
Tolerance class (dependent on
temperature range): |
IST AG
reference |
T < 0
°C |
T > 0
°C |
|
|
A |
0.2 +
0.014 x ιtι |
0.2 +
0.0035 x ιtι |
|
|
B |
0.4 +
0.028 x ιtι |
0.4 +
0.007 x ιtι |
|
|
C |
0.8
+ 0.056 x ιtι |
0.8 +
0.014 x ιtι |
|
Wire: |
Enameled Cu wire, Ø 0.2 mm |
|
|
Enameled Cu wire, Ø 0.15 mm |
|
|
Enameled Cu wire, metalized
backside, Ø 0.25 mm |
|
Alternative wire construction: |
Inverted wire |
|
|
|
|
|
|
|
Data
sheet (EN) (PDF 152,0 kB) |
Data sheet (DE) (PDF 168,0 kB) |
|
Application note (EN) (PDF
183,0 kB) |
|
200 °C Series (-60 °C to +200 °C)
Wired RTD Nickel Sensor
For medium temperature applications
| Operating
temperature range: |
-60 °C to + 200 °C |
|
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
|
|
| Characteristics
curve: |
Nickel ND (6180 ppm/K) |
|
| |
Nickel NL (5000 ppm/K) |
|
| |
Nickel NJ (6370 ppm/K) |
|
| |
Nickel NA (6720 ppm/K) |
|
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
T <
0 °C |
T >
0 °C |
| |
A |
0.2
+ 0.014 x ιtι |
0.2
+ 0.0035 x ιtι |
| |
B |
0.4
+ 0.028 x ιtι |
0.4
+ 0.007 x ιtι |
| |
C |
0.8
+ 0.056 x ιtι |
0.8
+ 0.014 x ιtι |
| Wire: |
Ag wire, Ø 0.25 mm |
| |
Cu/Ag wire, PTFE AWG 30 |
| |
Cu/Ag wire, PTFE AWG 26 |
| |
Cu/Ag wire, Ø 0.4 mm |
| |
Ni/Au flat wire, 0.2 x 0.4 mm |
| |
CuP-SIL wire post-plated with Sn |
| Alternative wire
construction: |
Inverted wire
|
| |
|
|
Data sheet (EN)
(PDF 154,0 kB) |
Data sheet (DE) (PDF 179,0 kB) |
|
Application note (EN) (PDF
183,0 kB) |
|
300 °C Series (-60 °C to +300 °C)
Wired RTD Nickel Sensor
For high temperature applications
| Operating
temperature range: |
-60 °C to + 300 °C |
|
| Nominal resistance
(Ohm at 0 °C): |
100, 500, 1000 |
|
|
| Characteristics
curve: |
Nickel ND (6180 ppm/K) |
|
| |
Nickel NL (5000 ppm/K) |
|
| |
Nickel NJ (6370 ppm/K) |
|
| |
Nickel NA (6720 ppm/K) |
|
| Tolerance class
(dependent on temperature range): |
IST
AG reference |
T <
0 °C |
T >
0 °C |
| |
A |
0.2
+ 0.014 x ιtι |
0.2
+ 0.0035 x ιtι |
| |
B |
0.4
+ 0.028 x ιtι |
0.4
+ 0.007 x ιtι |
| |
C |
0.8
+ 0.056 x ιtι |
0.8
+ 0.014 x ιtι |
| Wire: |
Ni wire, Ø 0.2 mm |
| |
Pt/Ni wire, Ø 0.2 mm |
| Alternative wire
construction: |
Inverted wire
|
| |
|
|
Data
sheet (EN) (PDF 148,0 kB) |
Data sheet (DE) (PDF 170,0 kB) |
|
Application note (EN) (PDF
183,0 kB) |
|
SMD Series (-60 °C to +150 °C)
RTD Nickel Sensor
For surface mounted temperature applications
TSic Sensors IC
- High performance/cost ratio
- Low current consumption: 35 µA during
operation
- High accuracy: up to +/-0.07°C with
oversampling
- Custom calibration available (narrow ranges
with increased accuracy)
- Digital and analog temperature signal output
- Temperature range: -50°C to +150°C
- TO92 and SOP-8 housings available
- Naked chip for chip-on-board assembly
 集成温度传感器的分类和应用
智能化集成温度传感器原理与应用,常用集成温度传感器介绍
SSD系列压力变送器选型手册
SSD系列温度传感器/变送器产品选型手册
SSD系列温湿度变送器选型手册
SSD系列环境监控产品选型手册
SSD系列智能数字仪表手册
SUNSTAR系列湿敏电阻/湿敏电容/变送器/加湿器/水浸传感器/热敏电阻详细资料说明书下载
|
湿敏电阻/湿度传感器