1st stage LNA
		RF to 900 MHz	RF to 2.5 GHz	RF to 6 GHz	RF to 18 GHz
	ATF-36xxx		0.25 dB NF	0.3 dB NF	0.5 dB NF
	ATF-13xxx			0.7 dB NF	1.1 dB NF
	ATF-10xxx	0.5 dB NF	0.5 dB NF	0.6 dB NF
	ATF-21xxx	0.6 dB NF	0.7 dB NF	0.9 dB NF
	HBFP-0405	1.1 dB NF	1.4 dB NF	2.1 dB NF
	HBFP-0420	1.0 dB NF	1.3 dB NF	2.0 dB NF
	AT-320xx	1.0 dB NF	1.5 dB NF
	AT-310xx	1.0 dB NF	1.5 dB NF
	AT-305xx	1.0 dB NF	1.5 dB NF
	AT-415xx	1.0 dB NF	1.5 dB NF
	AT-414xx	1.0 dB NF	1.5 dB NF

Function:	in a receiver, amplifies detected signal with minimal added noise
	(sets receiver sensitivity)
Operation:	Bias for noise	input matched to opt	output matched to S22'*
Key Parameters	NF:	0.25 to 3 dB
and ranges:	Ga:	8 to 20 dB
	Ic:	1 to 25 mA
	I IP3:	-20 to +10 dBm

2nd or 3rd stage LNA
	RF to 900 MHz	RF to 2.5 GHz	RF to 6 GHz	RF to 18 GHz
ATF-36xxx			17 dB Ga	12 dB Ga
ATF-13xxx		18 dB Ga	15 dB Ga	9 dB Ga
ATF-10xxx	20 dB Ga	16 dB Ga	12 dB Ga
ATF-21xxx	15 dB Ga	13 dB Ga	9 dB Ga
AT-415xx	15 dB Ga	11 dB Ga	6 dB Ga
AT-420xx	15 dB Ga	11 dB Ga
AT-320xx	14 dB Ga	11 dB Ga
AT-310xx	13 dB Ga	10 dB Ga
AT-305xx	11 dB Ga	8 dB Ga
markets	Cellular & Cordless 900 MHz ISM   LAN/modem   RF Tag & reader Mobile Radio (SMR) CATV pagers / messaging	GPS (1.5 GHz) PCN (1.8 GHz) USPCS (1.9 GHz) MMDS (2 GHz) 2.4 GHz ISM   LAN/modem   RF Tag & reader	TVRO (4 GHz) WLL (4 GHz) 5.8 GHz ISM   LAN/modem   RF Tag & reader	DBS/ DSS (12 GHz) VSAT (12 GHz)

Function:	increases signal level; minimizes mixer cascade NF contribution
Operation:	Bias for noise or gain	input matched to opt	output matched to S22'*
Key Parameters	Ga:	6 to 20 dB
and ranges:	Ic:	1 to 40 mA
	NF:	1 to 5 dB
	I IP3:	-20 to +20 dBm

Alternatives: