|
Waveguide assemblies and Rotary
Joint
Waveguide
assemblies
can
be fabricated to various
configurations in order to transmit
microwave energy from point A to
point B, around obstacles and with
the desired polarization.
|
Rectangular Waveguide
(up to 110GHz)
.Straight Sections
WR10-WR650 / VSWR:
1.05:1
.Cast Bend Assemblies
WR28-WR284 / VSWR:
1.10:1
.Formed Bend Assemblies
WR10-WR430 / VSWR:
1.10:1
.Mitered Bend Assemblies
WR28-WR650 / VSWR:
1.10:1
.Cast Offset Assemblies
WR28-WR284 / VSWR:
1.10:1
.Formed Offset
Assemblies
WR28-WR284 / VSWR:
1.10:1
.Twist Assemblies
WR10-WR430 / VSWR:
1.10:1
.Custom Bend Assemblies
WR10-WR430 |
Double Ridge Waveguide
(up to 40GHz)
.Straight Sections
WRD180-WRD250 / VSWR:
1.10:1
.Formed Bend Assemblies
WRD180-WRD250 / VSWR:
1.15:1
.Formed Offset
Assemblies
WRD180-WRD250 / VSWR:
1.15:1
.Twist Assemblies
WRD180-WRD250 / VSWR:
1.15:1
.Custom Bend Assemblies
WRD180-WRD250
|
Rotary joints
used to transmit microwave signals
(and sometimes associated electrical
signals) through a rotary motion,
usually to feed a movable
(in elevation and/or azimuth)
antenna.
l
Single Channel
(Rectangular waveguide only)
WR28-WR284 / VSWR: 1.15:1, insertion
loss is 0.15 dB typical over 25% of
the waveguide band.
l
Dual Channel
(Rectangular waveguide only)
1.20:1 VSWR over the waveguide band,
0.2 insertion loss max.,50dB
isolation between Channel
l
Coaxial
(D.C. to 40GHz)
-Type N, SMA, TNC, K-Type and other
connectors available.
K-Type coaxial rotary joints have a
long ife and are very durable.
Frequency range is from DC to 40Ghz,
Average power is calculated by 50/√(fGhz)
W max.
Peak power is 500 W max.,Starting
torque is 5 oz-in.
|
