应变片
- Weldable strain gauge series
- General use strain gauge
-
F series general use
Applicable specimen : Metal, Glass, Ceramic Operational temperature : -20 ~ +80°C -
F series Leadwire general use
Applicable specimen : Metal, Glass, Ceramic Operational temperature : -20 ~ +80°C -
UF series general use
Applicable specimen : Metal, Ceramics, Composite Operational temperature : -20 ~ +150°C -
UF series Leadwire general use
Applicable specimen : Metal, Ceramics, Composite Operational temperature : -20 ~ +150°C
-
F series general use
- Waterproof strain gauge
-
WF series Waterproof strain gauge
Applicable specimen : Metal, Glass, Ceramic Operational temperature : 0 ~ +80°C
-
WF series Waterproof strain gauge
- Thermocouple integrated strain gauge
-
Temperature series strain gauge
A T-type thermocouple is integrated with an ordinary strain gauge.
-
Temperature series strain gauge
- High temperature use strain gauge
-
QF series High temperature use strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -20 ~ +200°C -
ZF series High temperature use strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -20 ~ +300°C -
EF series High temperature use strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -196 ~ +200°C/-196 ~ +300°C -
HZF series High temperature use strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -196 ~ +350°C
-
QF series High temperature use strain gauge
- high and low temperature strain gauge
-
CEF series 120Ω high and low temperature strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -269 ~ +200°C
-
CEF series 120Ω high and low temperature strain gauge
- Cryogenic temperature use strain gauge
-
CF series 350ΩCryogenic temperature use strain gauge
Applicable specimen : Metal, Ceramics Operational temperature : -269 ~ +80°C
-
CF series 350ΩCryogenic temperature use strain gauge
- Weldable strain gauge
-
AW series Weldable strain gauge
AWM Operational temperature : -196 ~ +300°C
AWMD Operational temperature : -196 ~ +800°C
AWH Operational temperature : -196 ~ +650°C
AWHU Operational temperature : -196 ~ +800°C
AW-6 Operational temperature : -196 ~ +300°C
AWC Operational temperature : -20 ~ +100°C
AWCH Operational temperature : -30 ~ +200°C
-
AW series Weldable strain gauge
- Concrete material use strain gauge
-
P series Polyester wire strain gauge
Applicable specimen : Concrete, Mortar, Rock, Metal Operational temperature : -20 ~ +80°C -
PF series Polyester foil strain gauge
Applicable specimen : Metal, Mortar Operational temperature : -20 ~ +80°C -
FLM / WFLM series Metal backing strain gauge
Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +80°C
-
P series Polyester wire strain gauge
- Mold strain gauge
-
PM series Mold strain gauge
Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +60°C -
PMF series Mold strain gauge
Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +60°C -
PMFLS series Asphalt Mold strain gauge
Applicable specimen : Asphalt Operational temperature : -20 ~ +60°C withstands a high temperature to 200°C
-
PM series Mold strain gauge
- Asphalt Pavement surface strain gauge
-
SSM-360 series Asphalt Pavement surface strain gauge
Applicable specimen : Asphalt Operational temperature : -20 ~ +80°C 16 strain elements
-
SSM-360 series Asphalt Pavement surface strain gauge
- Composite strain gauge
-
UBF series Composite strain gauge
Applicable specimen : Composite Operational temperature : -30 ~ +150°C -
BF series Composite strain gauge
Applicable specimen : Composite Operational temperature : -20 ~ +200°C
-
UBF series Composite strain gauge
- low elastic strain gauge Plastics use
-
GF series low elastic strain gauge
Applicable specimen : Plastics Operational temperature : -20 ~ +80°C
-
GF series low elastic strain gauge
- low elastic strain gauge Wood, Gypsum use
-
LF series low elastic strain gauge Wood, Gypsum use
Applicable specimen : Wood, Gypsum Operational temperature : -20 ~ +80°C -
PFLW / PLW series WOOD-long term use strain gauge
Applicable specimen : Wood Operational temperature : -20 ~ +80°C
-
LF series low elastic strain gauge Wood, Gypsum use
- Magnetic field strain gauge
-
MF series Magnetic field strain gauge
Applicable specimen : Metal, Concrete Operational temperature : -20 ~ +80°C/-20 ~ +200°C
-
MF series Magnetic field strain gauge
- Post-yield strain gauge
-
YEF series Post-yield strain gauge
Applicable specimen : Metal Operational temperature : -20 ~ +80°C -
YF series Post-yield strain gauge
Applicable specimen : Metal Operational temperature : -20 ~ +80°C
-
YEF series Post-yield strain gauge
- High Endurance Strain Gauge
- >DSF
series High Endurance Strain Gauge
Applicable specimen : Composite, Metal Operational temperature : -60 ~ +200°C
high stress level fatigue test use strain gauges
- >DSF
series High Endurance Strain Gauge
- One-side strain gauge
- >DD
series One-side strain gauge
Applicable specimen : Metal Operational temperature : -10 ~ +70°C
- >DD
series One-side strain gauge
- Crack detection gauge
-
FAC Crack detection gauge
Applicable specimen : Metal, Concrete Operational temperature : -20 ~ +80°C
-
FAC Crack detection gauge
- Stress gauge
-
SF series Stress gauge
Applicable specimen : Metal Operational temperature : -20 ~ +200°C
-
SF series Stress gauge
- Temperature gauge
-
TF series Temperature gauge
Applicable specimen : General Operational temperature : -20 ~ +200°C
-
TF series Temperature gauge
- Bolt strain gauge
-
BTM series Bolt strain gauge
Applicable specimen : Bolt axial force M10 Operational temperature : -10 ~ +80°C
-
BTM series Bolt strain gauge
- Transducer-specific strain gauges
-
Transducer-specific strain gauges
Applicable specimen : Metal Operational temperature : -20 ~ +200°C
-
Transducer-specific strain gauges
- Frictional strain gauge
-
Friction type Axial Strain Transducer FGAH-1A
Applicable specimen : Steel rod, Tierod ø10-25mm -
Strain Checker FGMH-1B/FGMH-2A/FGMH-3A
Applicable specimen : Metal (Ferromagnetic) shape: flat -
Frictional Torque Transducer FGDH-1B (digital telemetry
type)
Applicable specimen : Drive shaft ø20-30mm -
Frictional Torque Transducer FGDH-2A (digital telemetry
type)
Applicable specimen : Drive shaft ø20-30mm
-
Friction type Axial Strain Transducer FGAH-1A
-
-
Lineup
of almost 4,000 gauges of the
industry highest level to meet
all requirements
AW series High temperature Weldable strain gauge
These gauges are fully encapsulated in a corrosion-resisting metal tube for use in various environments, including gas-filled atmospheres and underwater. These gauges can be easily installed by using dedicated spot welder W-50R.
Detailed material
AWM-8 Quarter bridge with 3-wire system
The AWM is usable up to 300°C for both static and dynamic measurement. The backing material is available in Inconel 600 or SUS304 which should be selected according to the test specimen material.
|
Applicable specimen
|
Metal
|
Backing
|
Stainless steel or Inconel
|
|
Operational temperature(°C)
|
-196~+300°C
|
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
RT~+300°C
|
Strain limit
|
1%
(10000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
|
Type
|
Gauge
length (mm) |
Gauge base
|
Resistance
in (Ω) |
||
|
Dimension
(mm) |
Materials
|
||||
|
Static/Dynamic
measurement 300°C |
AWM- 8-1A-2-11.0
|
8
|
16×5
|
Inconel 600
|
120
|
|
AWM- 8-1B-2-11.0
|
SUS304
|
||||
Each package contains 1gauges.
AWMD-5, AWMD-8 (for dynamic measurement only : -196 to +800°C) Full bridge
The AWMD is applicable up to 800°C and it is dedicated to dynamic strain measurement. A high pass filter is a standard accessory. Using the high pass filter, unnecessary direct current component or low frequency component (thermal output, drift etc.) in the measurement signal can be neglected. The DC exciting dynamic strainmeter (DC-96A/DC-97A) or the smart strain recorder (DC-204R), Multi-Recorder TMR-200 should be used for measurement.
|
Applicable specimen
|
Metal
|
Backing
|
Inconel
|
|
Operational temperature(°C)
|
-196~+800°C
|
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
—
|
Strain limit
|
1%
(10000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
Option code P for NDIS plug connector (available with AWMD-8/AWH/AWHU) attached to Temperature-compensation board or High-pass filter
|
Type
|
Gauge
length (mm) |
Gauge base
|
Resistance
in (Ω) |
||
|
Dimension
(mm) |
Materials
|
||||
| Dynamic use only 800°C |
AWMD-5-AKMS-2(6F)-1.6Hz*
|
5
|
10×3
|
Inconel 600
|
60
|
|
AWMD-8-A-2-1.6Hz*
|
8
|
16×5
|
120
|
||
Each package contains Quarter Bridges.
AWH-8 Fulll bridge
The backing material is available in Inconel 600 or SUS321 which should be selected according to the test specimen material. Although it has a half bridge construction consisting of active and dummy gauges, the measurement is made by the full bridge method using the supplied temperature compensation circuit board. The maximum operational temperature is 600°C for static measurement and 650°C for dynamic measurement.
|
Applicable specimen
|
Metal
|
Backing
|
SUS321 or Inconel
|
|
Operational temperature(°C)
|
static:
-196~+600°C dynamic: -196~+650°C |
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
static:
RT~+600°C dynamic: RT~+650°C |
Strain limit
|
0.6%
(6000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
|
Type
|
Gauge
length (mm) |
Gauge base
|
Test specimen
|
Resistance
in (Ω) |
||
|
Dimension
(mm) |
Materials
|
|||||
|
Static
measurement 600°C Dynamic measurement 650°C |
AWH-8-7A-2-11.0
|
8
|
16×5
|
Inconel 600
|
Mild steel
|
120
|
|
AWM-8-7B-2-17.0
|
SUS321
|
Stainless steel
|
||||
AWHU-5, AWHU-8 Fulll bridge
These gauges are usable up to 800°C for both static and dynamic measurement. Although it has a half bridge construction consisting of active and dummy gauges, the measurement is made by the full bridge method using the supplied temperature compensation circuit board. The gauge base, junction part and cable of this gauge are constructed small as a standard specification and it is suited for being mounted on a narrow or a curved part.
|
Applicable specimen
|
Metal
|
Backing
|
Inconel
|
|
Operational temperature(°C)
|
-196~+800°C
|
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
RT~+800°C
|
Strain limit
|
1%
(10000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
|
Type
|
Gauge
length (mm) |
Gauge base
|
Resistance
in (Ω) |
||
|
Dimension
(mm) |
Materials
|
||||
|
Static/Dynamic
measurement 800°C |
AWHU-5-9AKM-2(6F)-12.7
|
5
|
10×3
|
Inconel 600
|
60
|
|
AWHU-8-9AKM-2(6F)-12.7
|
8
|
16×5
|
120
|
||
AW-6-350-11-01LT Quarter bridge with 3-wire system (G.F. 2.1 approx.)
These gauges have corrosion-resisting stainless steel backing
with thickness of 0.08mm. They are easily installed by using
dedicated spot welder W-50R.
This gauge is suited for strain measurement in high temperature up
to 300°C, for measurement of specimen to which adhesion is not
applicable or for long term measurement.
|
Applicable specimen
|
Metal
|
Backing
|
SUS304
|
|
Operational temperature(°C)
|
-196~+300°C
|
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
-10~+100°C
|
Strain limit
|
0.5%
(5000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
|
Type
|
Gauge
length (mm) |
Gauge base
|
Test specimen
|
Resistance
in (Ω) |
|
|
Dimension
(mm) |
Materials
|
||||
|
AW-6-350-11-01LT
|
6
|
24×5
|
SUS304
|
Mild steel
|
350
|
Each package contains 5gauges.
AWC-8B-11-3LT Quarter bridge with 3-wire system (G.F. 2.1 approx.)
This gauge is fully encapsulated in a stainless steel tube. It enables long term strain measurement in harsh environment.
|
Applicable specimen
|
Metal
|
Backing
|
SUS304
|
|
Operational temperature(°C)
|
-20~+100°C
|
Element
|
Special alloy
|
|
Temperature compensation range(°C)
|
-10~+100°C
|
Strain limit
|
0.5%
(5000×10-6strain) |
|
Bonding adhesive
|
Spot welding
(TML spot welder W-50R is required) |
Fatigue life at room temperature
|
1×106
(±1000×10-6strain) |
(UNIT:mm)
|
Type
|
Gauge
length (mm) |
Gauge base
|
Test specimen
|
Resistance
in (Ω) |
|
|
Dimension
(mm) |
Materials
|
||||
|
AWC-8B-11-3LT
|
8
|
28×5
|
SUS304
|
Mild steel
|
120
|
Each package contains 5gauges.
High
precision and stable quality is
realized in response to reliance
of a user.
Designed
for various measurement
application with strain gauges,
thermocouple, DC voltage and
measurement purpose of static,
dynamic strain and frequency
analysis.
Integrated
measuring system for wheel
6-component force, wheel toruqe
and displace on driving
Integrated
measuring system of sensor and
instruments designed for special
purpose 
Various
measurement software designed
specially for use with strain
instruments of TML 