YF series Post-yield strain gauge

This gauge is designed for measurement of large strain up to 15 to 20%. It is not applicable to the measurement of repeated strain either in elastic nor in large range. The CN-Y is recommended as an adhesive if the measurement is made after a few days or longer of strain gauge bonding. Large strain measurement is possible even after one year of bonding the gauge with the CN-Y adhesive. (Provided that the specimen is stored in room temperature.)

Applicable specimen	Metal	Backing	Special plastics
Operational temperature(°C)	-20~+80°C	Element	Cu-Ni
Temperature compensation range(°C)	—	Strain limit	15~20% (150000~200000 ×10-6strain)
Bonding adhesive	CN,CN-Y	Fatigue life at room temperature	—

Detailed material

• YF series Post-yield strain gauge

LARGE STRAIN MEASUREMENT

Single-element (G.F. 2.1 approx.)
　

Gauge pattern	Type	Gauge length (mm)	Gauge width (mm)	Backing length (mm)	Backing width (mm)	Resistance (Ω)
	YFLA-2	2	1.8	7.5	4.0	120
	YFLA-5	5	2.0	12.0	4.0	120
	YFLA-10	10	2.6	16.6	4.9	120
	YFLA-20	20	1.8	26.0	3.7	120

Each package contains 10 gauges.

Leadwire-integrated YEF series (made-to-order)

Lead wires	Operational temperature range	Gauge type exampled	Colors of Lead wire
2-wire Parallel vinyl wire	-20~+80°C	L:YFLA-2-3L	Grey
3-wire Parallel vinyl wire	-20~+80°C	LT:YFLA-2-3LT	Blue stripe (independent)

应变计目录资料下载Strain Gauges

Strain gauge series list

• General use strain gauge
  • F series general use
    Applicable specimen : Metal, Glass, Ceramic　 Operational temperature : -20 ~ +80°C
  • F series Leadwire general use
    Applicable specimen : Metal, Glass, Ceramic　 Operational temperature : -20 ~ +80°C
  • UF series general use
    Applicable specimen : Metal, Ceramics, Composite Operational temperature : -20 ~ +150°C
  • UF series Leadwire general use
    Applicable specimen : Metal, Ceramics, Composite Operational temperature : -20 ~ +150°C
• Waterproof strain gauge
  • WF series Waterproof strain gauge
    Applicable specimen : Metal, Glass, Ceramic Operational temperature : 0 ~ +80°C
• Thermocouple integrated strain gauge
  • Temperature series strain gauge
    A T-type thermocouple is integrated with an ordinary strain gauge.
• High temperature use strain gauge
  • QF series High temperature use strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -20 ~ +200°C
  • ZF series High temperature use strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -20 ~ +300°C
  • EF series High temperature use strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -196 ~ +200°C/-196 ~ +300°C
  • HZF series High temperature use strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -196 ~ +350°C
• high and low temperature strain gauge
  • CEF series 120Ω high and low temperature strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -269 ~ +200°C
• Cryogenic temperature use strain gauge
  • CF series 350ΩCryogenic temperature use strain gauge
    Applicable specimen : Metal, Ceramics Operational temperature : -269 ~ +80°C
• Weldable strain gauge
  • AW series Weldable strain gauge
    AWM Operational temperature : -196 ~ +300°C
    AWMD Operational temperature : -196 ~ +800°C
    AWH Operational temperature : -196 ~ +650°C
    AWHU Operational temperature : -196 ~ +800°C
    AW-6 Operational temperature : -196 ~ +300°C
    AWC Operational temperature : -20 ~ +100°C
    AWCH Operational temperature : -30 ~ +200°C
• Concrete material use strain gauge
  • P series Polyester wire strain gauge
    Applicable specimen : Concrete, Mortar, Rock, Metal Operational temperature : -20 ~ +80°C
  • PF series Polyester foil strain gauge
    Applicable specimen : Metal, Mortar Operational temperature : -20 ~ +80°C
  • FLM / WFLM series Metal backing strain gauge
    Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +80°C
• Mold strain gauge
  • PM series Mold strain gauge
    Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +60°C
  • PMF series Mold strain gauge
    Applicable specimen : Concrete, Mortar Operational temperature : -20 ~ +60°C
  • PMFLS series Asphalt Mold strain gauge
    Applicable specimen : Asphalt Operational temperature : -20 ~ +60°C withstands a high temperature to 200°C
• Asphalt Pavement surface strain gauge
  • SSM-360 series Asphalt Pavement surface strain gauge
    Applicable specimen : Asphalt Operational temperature : -20 ~ +80°C 16 strain elements
• Composite strain gauge
  • UBF series Composite strain gauge
    Applicable specimen : Composite Operational temperature : -30 ~ +150°C
  • BF series Composite strain gauge
    Applicable specimen : Composite Operational temperature : -20 ~ +200°C
• low elastic strain gauge Plastics use
  • GF series low elastic strain gauge
    Applicable specimen : Plastics Operational temperature : -20 ~ +80°C
• low elastic strain gauge Wood, Gypsum use
  • LF series low elastic strain gauge Wood, Gypsum use
    Applicable specimen : Wood, Gypsum Operational temperature : -20 ~ +80°C
  • PFLW / PLW series WOOD-long term use strain gauge
    Applicable specimen : Wood Operational temperature : -20 ~ +80°C
• Magnetic field strain gauge
  • MF series Magnetic field strain gauge
    Applicable specimen : Metal, Concrete Operational temperature : -20 ~ +80°C/-20 ~ +200°C
• Post-yield strain gauge
  • YEF series Post-yield strain gauge
    Applicable specimen : Metal Operational temperature : -20 ~ +80°C
  • YF series Post-yield strain gauge
    Applicable specimen : Metal Operational temperature : -20 ~ +80°C
• High Endurance Strain Gauge
  • >DSF series High Endurance Strain Gauge
    Applicable specimen : Composite, Metal Operational temperature : -60 ~ +200°C
    high stress level fatigue test use strain gauges
• One-side strain gauge
  • >DD series One-side strain gauge
    Applicable specimen : Metal Operational temperature : -10 ~ +70°C
• Crack detection gauge
  • FAC Crack detection gauge
    Applicable specimen : Metal, Concrete Operational temperature : -20 ~ +80°C
• Stress gauge
  • SF series Stress gauge
    Applicable specimen : Metal Operational temperature : -20 ~ +200°C
• Temperature gauge
  • TF series Temperature gauge
    Applicable specimen : General Operational temperature : -20 ~ +200°C
• Bolt strain gauge
  • BTM series Bolt strain gauge
    Applicable specimen : Bolt axial force M10 Operational temperature : -10 ~ +80°C
• Transducer-specific strain gauges
  • Transducer-specific strain gauges
    Applicable specimen : Metal Operational temperature : -20 ~ +200°C
• Frictional strain gauge
  • Friction type Axial Strain Transducer FGAH-1A
    Applicable specimen : Steel rod, Tierod 　ø10-25mm
  • Strain Checker FGMH-1B/FGMH-2A/FGMH-3A
    Applicable specimen : Metal (Ferromagnetic) 　shape: flat
  • Frictional Torque Transducer FGDH-1B (digital telemetry type)
    Applicable specimen : Drive shaft 　ø20-30mm
  • Frictional Torque Transducer FGDH-2A (digital telemetry type)
    Applicable specimen : Drive shaft 　ø20-30mm