FEATURES: • Miniature Sizes 1/8”, 1/16”, grid lengths
• Flame spray or ceramic cement application
• Tight resistance tolerances
• Unmatched grid alignment
HFN Series Free Filament Strain Gages are the result of 20 years of high
temperature strain gage experience. The fixturing and unique capabilities
that produce these gages are the result of engineering programs developed
by the most experienced staff in the world.

SPECIFICATIONS

Gage Grid: ...................... Niome V Alloy -.0007" Dia.
Gage Carrier: .................. Fiberglass/Teflon with Silicone Adhesive
Leads: ............................. Chromel A-0.003" Dia.
Shelf Life: ........................ Carrier Adhesive 9 Months
Fatigue Life: .................... Nominal 2 x 106 cycles at ± 750μ”/” at 1000°F on Hastelloy X
Maximum Gage Current: 30 Milliamp. at 500°C on Hastelloy X, 1mm thick

Gage Factor

Type Code：

HFN-12-063-SCW
HFN-12-125-SCW
HFN-35-125-SCW

高温箔式应变片 KH

高温箔式应变片 KFH

可焊接高温应变片

技术参数：

通用型号：

弯曲性优异,防水抗温度性强,若不直接接触水时,不需要进行表面涂层处理。

.所有型号都可以根据要求带有或不带有引线。

.性能：

 工作温度范围：-196～+120℃(当与CC-33A粘结时)、-196～+150℃（PC-6）

.敏感栅长度：0.2、0.3、1、2、3、4、5、6、10、20、30mm

.应变片类型：单轴、双轴、三轴、四轴、单轴5片、双轴5片

.导线的种类：聚酯铜线（2～100mm）、乙烯树脂被覆线（15cm～30m）、中温用导线（15cm～30m）

.胶水：氰基丙稀酸盐粘结剂CC-33A

.可用于特别应用特别型号:一般用途单轴、压力分析、扭矩测量、细线、受剪应变、集中力测量（单轴5片型）

.电阻：60、120、350、500、1000Ω

用于印刷电路板的：

采用仪器标准尺寸，能接装于机器上或狭小部位，超小型：单轴型1.2×1.1mm、双轴、三轴型2.5×2.5mm。.敏感栅长度：0.2、1mm。.类型：单轴型、三轴型0°/90°/45° .电阻:120、350Ω

用于复合材料的：

最适合用于塑料复合材料（CFRP、GFRP）的强度测试。.敏感栅长度：2、5mm。.类型：单轴型、三轴型0°/90°/45° .电阻:120、350Ω

      strain gage code:

Gage patern	Part No.	Gage length	base size	Patern size
	F-02W-12T11W03	0.2	2.7 x 2.2	1.3 x 1.0
	F-02W-12T11W3
	F-05W-12T11W03	0.5	3.0 x 2.5	1.3 x 1.4
	F-05W-12T11W3
	F-1S-12MT11W03	1.0	5.2 x 2.5	2.6 x 1.4
	F-1S-12MT11W1
	F-1S-12MT11W3
	F-1S-12MT11W5
	F-2-12T11W03	2.0	6.7 x 3.0	4.3 x 1.9
	F-2-12T11W1
	F-2-12T11W3
	F-2-12T11W5
	F-3N-12T11W03	3.0	9.0 x 3.5	6.0 x 1.8
	F-3N-12T11W1
	F-3N-12T11W3
	F-3N-12T11W5
	F-4-12T11W03	4.0	8.2 x 3.5	5.6 x 2.0

	FX-5-12T11W03	5.0	φ12.0	8.0 x 2.5
	FX-5-12T11W1
	FX-5-12T11W3
	FX-5-12T11W5
	FR-2-12T11W03	2.0	φ8.0	4.1 x 1.4
	FR-2-12T11W1
	FR-2-12T11W3
	FR-2-12T11W5
	FR-5-12T11W03	5.0	φ12.0	8.0 x 2.5
	FR-5-12T11W1
	FR-5-12T11W3
	FR-5-12T11W5

HFM Series Moleculoy® Alloy wire strain gages provide a “no shelf life” alternative for
elevated temperature dynamic strain gage requirements. Moleculoy is a non-magnetic
75/20-nickel omium alloy modified with cobalt and aluminum. The flattened and
heat-treated Moleculoy grid eliminates the need for a grid carrier during storage,
virtually eliminating shelf life. The standard omel leads are installed inboard. This
feature combined with a narrow pitch reduces grid size to a minimum. Convoluted leads
also available.

SPECIFICATIONS
Gage Grid: ...Moleculoy® Alloy, Flattened Carrier: ............... None
Leads: ........... Chromel A-0.003” Dia. Shelf Life: ........... None

HFM-20-125-SCW:  0.125 inch/3.18 mm; 0.080 inch/2.00 mm; 200 ± 2.0 OHMS; ± 20 OHMS; 70 mm/2 3/4”;

HFM-10-063-SCW:  0.080  inch/2.00mm; 0.180 inch/4.60 mm; 100 ± 2.0 OHMS; ± 10 OHMS; 70 mm/2 3/4”;

high-temperature weldable strain gages are free-filament wire

strain gages pre-bonded to shim
stock using flame sprayed alumina. The gages can be
welded to the test structure using a capacitive disge spot
welder (such as Micro-Measurements Model 700), permitting
easy installation in the field, especially on large structures.
High-temperature weldable strain gages are excellent in
applications protection against moisture is not
required. The fatigue resistance of this bonded wire strain
gage makes it the best choice for dynamic, impact or
vibratory strain measurements to 1800°F [980°C]. Their use
in measuring static strains should be avoided.
High-temperature weldable strain gages are available with
grids of Niome V or Pt8W alloys. They can be ordered
with either of two types of preattached high-temperature
insulated cable.

Complete assembly consists of a free-filament gage bonded
to a shim with an integral high-temperature cable with
omel/alumel wires. The mineral insulated, two-conductor
cable with an Inconel metal jacket is rated to 1800°F [980°C]
and offers excellent protection in harsh environments. While
the ends are sealed to avoid moisture absorption during
shipping or storage, care should be taken when using
M-Series cables to ensure that the mineral insulation does
not absorb moisture during handling and application.
Complete assembly consists of a free-filament gage bonded
to a shim, a weldable transition terminal and a high
temperature cable with omel/alumel wire. A fiberglass-
insulated braided, two-conductor cable assembly is attached
at the gage end through alumina insulators strap-welded to
the terminal shim, providing a firm anchor for the cable at the
gage end. The cable conductors are threaded through
lengthwise holes in the alumina insulators and bonded to the
insulators with high strength ceramic cement to prevent wire
movement at the gage - cable weld junction. The fiberglass
cable is rated to 1200°F [650°C] and is used fraying
due to vibration is not a concern. F-Series cables are more
flexible than M-Series cables.

Special Use Strain Gages - Weldable Strain Gages

主要技术说明：

低温箔式应变片（KFL）

用PC-6胶粘结可用杂低至-269℃。 .敏感栅长度：0.2、0.5、1、2、5、30mm。 .类型：单轴型、三轴型0°/90°/45° .电阻:120、350Ω

可焊接防水箔式应变片（KCW ）

.制备有单轴单元件G10和全桥接式G14S型两种 .不要求涂覆处理的可焊接接型 .凸缘尺寸:5×21mm、t=0.1 .适用温度范围：-20～+100℃

可焊接高温应变片（KHCD/KHCS/KHCM/HC）

点焊安装。 .最大工作温度KHCD：800℃  KHCS：750℃  KHCM：650℃  HC：550℃ .敏感栅长度：5mm（HC、KHCD）、10mm（KHCD、KHCS、KHCM）。 .类型：单轴、双片（KHCS、KHCM、HC）

带保护器的箔式应变片（KCH）

最适合用于大型容器罐的称量测量和卡车皮重的计算工具。 .方便实用胶和柱头螺栓安装 .敏感栅长度：2、5mm。 .类型：单轴型、双轴0°/90°、三轴型0°/90°/45° .电阻:350Ω

带温度传感器的箔式应变片（KFGT ）

应变片和T型热电偶一体。 .适用有变化材料或温度变化的应变测量。 .对明显的热传导应变可以进行高精度补偿。 .敏感栅长度：2、5mm。 .类型：仅单轴。 .工作温度范围：-10～+120℃。 .电阻：120Ω。 .带1m导线。

用于印刷电路板的箔式应变片（KFRS）

采用仪器标准尺寸，能接装于机器上或狭小部位，超小型：单轴型1.2×1.1mm、双轴、三轴型2.5×2.5mm。 .敏感栅长度：0.2、1mm。 .类型：单轴型、三轴型0°/90°/45° .电阻:120、350Ω

用于复合材料的箔式应变片（KFRP）

最适合用于塑料复合材料（CFRP、GFRP）的强度测试。 .敏感栅长度：2、5mm。 .类型：单轴型、三轴型0°/90°/45° .电阻:120、350Ω

用于混凝土的应变片（KC）

.敏感栅长度：60、70、80、120mm。 .类型：单轴型

箔式应变片（KFR）

聚酯亚胺树脂基保证在-196～+150℃的工作范围内应用(PC-6胶) . 敏感栅长度：0.15、0.2、0.5、1、2、5mm .类型：单轴型、三轴0°/90°/45°、单轴5片 .电阻：120、350Ω

通用箔式应变片

弯曲性优异,防水抗温度性强,若不直接接触水时,不需要进行表面涂层处理。

.所有型号都可以根据要求带有或不带有引线。

.性能：

  工作温度范围：-196～+120℃(当与CC-33A粘结时)、-196～+150℃（PC-6）

.敏感栅长度：0.2、0.3、1、2、3、4、5、6、10、20、30mm

.导线的种类：聚酯铜线（2～100mm）、乙烯树脂被覆线（15cm～30m）、中温用导线（15cm～30m）

.胶水：氰基丙稀酸盐粘结剂CC-33A

.可用于特别应用特别型号:一般用途单轴、压力分析、扭矩测量、细线、受剪应变、集中力测量（单轴5片型）

.电阻：60、120、350、500、1000Ω

防水型箔式应变片

适用于户外和水下（水下10MPa，100小时）。

.敏感栅长度：2、5mm。

.类型：单轴型、双轴型0°/90°、三轴型0°/90°/45°（仅KFW有三轴型）

.电阻:120、350Ω

高延长率箔式应变片

.可用测量20％～30％的材料变形。

.敏感栅长度： 2、5mm。

.应变率：约2.0

.电阻:120Ω

高延长率金属线应变片

.可用测量4％～20％的材料变形。

.敏感栅长度： 6mm。

.类型：单轴

.工作温度范围：-10～+80℃(胶CC-36)

高温箔式应变片

工作温度范围：-50～+350℃(胶PI-32)。

.敏感栅长度： 5mm。

.类型：单轴型、三轴型0°/90°/45°

.电阻:120、350Ω

高温箔式应变片

工作温度范围：-196～+250℃(胶PI-32)。

.敏感栅长度：0.2、0.5、1、2、5mm。

.类型：单轴型、三轴型0°/90°/45°

.电阻:120、350Ω

高温箔式应变片

.工作温度范围：-196～+300℃(胶PI-32)。

.敏感栅长度：2、5mm。

.类型：单轴型、三轴型0°/90°/45°

.电阻:120、350Ω

欢迎来电垂询！！！

.应变片类型：单轴、双轴、三轴、四轴、单轴5片、双轴5片

FEATURES:

• Miniature Sizes 1/8”, 1/16”, grid lengths
• Flame spray or ceramic cement application
• Tight resistance tolerances
• Unmatched grid alignment

HFP Series strain gages are used for high temperature dynamic testing
and in medium to high temperature transducers. They may be applied
by flame spray or ceramic cement techniques. Ceramic cement installed
gages offer superior stability and resistance to creep compared to
organic adhesives.

SPECIFICATIONS
Gage Grid: ............. Platinum-Tungsten Alloy, 0.0005” Dia.
Leads: .................... Platinum Alloy, 0.003” Dia. x 1.5 Long
Carrier: .................. Teflon Tape with Silicone Adhesive
Shelf Life: .............. Carrier Adhesive 9 Months*
Fatigue Life: .......... 1 x 106 cycles at ± 1500μ”/” at 77°F
Resistance: ............ 120 OHMS nominal, 350 OHMS available
Gage Factor: ......... Nominal 4.0

FEATURES: • Standard Sizes 1/8”, 1/4”, grid lengths
• Ceramic cement application
• Tight resistance tolerances
• Unmatched grid alignment
HFK Series Free Filament Strain Gages are the result of 40 years of
high temperature strain gage experience. The fixturing and unique
capabilities that produce these gages are the result of engineering
programs developed by the most experienced staff in the world.
SPECIFICATIONS
Gage Grid: ...................... Karma Alloy, Heat Treated
Gage Carrier: .................. Fiberglas/Teflon with Silicone Adhesive
Leads: ............................. Chromel A-0.003" Dia.
Shelf Life: ........................ Carrier Adhesive 9 Months
Fatigue Life: .................... Nominal 2 x 106 cycles at ± 1500μ”/”

HFK-12-125-SCW  (1)
HFK-35-250-SCW   (2)
                  Gage Factor Nominal      Gage Factor                 Grid Length                 Grid Width Nominal       Resistance    ResistanceTolerance     Lead Length
  (1)         0.250 inch(6.35 mm)   0.125 inch(3.17 mm)     0.130 inch(3.30 mm)    0.060 inch(1.52 mm)      120 Ω               ± 2 Ω                         2 3/4”(70 mm)
  (2)           0.250 inch(6.35 mm)   0.125 inch(3.17 mm)     0.130 inch(3.30 mm)    0.060 inch(1.52 mm)    350 Ω               ± 4 Ω                         2 3/4”(70 mm)

　

APPLICATION ....All gage lengths can be applied with ceramic cement or supplied on weldable form.

Gage Grid: .......................Fe Cr Al Alloy (.001") .003mm diameter round wire
Leads: ..............................Fe Cr Al Alloy (.003") .008mm diameter round wire
with “Z” configuration flattened to (.0015") .004 mm
in grid area
Carrier: ............................Fiberglass reinforced Teflon tape carrier with silicone
adhesive (shelf life of grid carrier [Figure 2] is 9 months)
Resistance: ......................120.0 ohms ± 2.0 ohms at 20°C (68°F)
Gage Factor: ...................2.4 nominal at 20°C (68°F)
Gage Current: .................30 Milliamperes, max.
Temperature Range: ......Cryogenic to 850°C (1560°F)
Weldable Gage ONLY:
Shim Material: ................Hastelloy X
Bonding Matrix: .............Alumina
Shelf Life: ........................Unlimit

Density: ............................................................. 7.1 Mg/m3 (0.256 lb./in3)
Chemical Analysis, Approx.: ....................... 72 Fe 22.5 Cr 5.5 Al
Resistivity @ 20°C (68°F): ............................ 875, ohms - cmf
Max. Operating Temperature: ................... 1375°C (2500°F)
Melting Point, Approx.: ................................ 1510°C (2750°F)
Temperature Factor,
Resistant Max. Temp.: ................................... 1.044
Thermal Expansion, ppm/°F: ..................... 20 - 250°C = 6.1 (68 - 482°F)
20 - 500°C = 6.9 (68 - 932°F)
20 - 750°C = 7.7 (68 - 1382°F)
20 - 1000°C = 8.3 (68 - 1832°F)
Gage Factor K @ 20°C (68°F): .................... 2.3 to 2.6
Gage Factor vs. Temperature
Coefficient:................................ -5.73 x 10-4/°C
Tensile Strength, PSI: .................................... 140,000 (hard), 92,000 (soft)
Tensile Strength, MPa: .................................. 965 (hard), 690 (soft)
Elongation, % (Soft): ..................................... 22%
Magnetic: ......................................................... Yes, below 540°C (1000°F)
Thermoelectric Potential vs. Cu: ............... -2.6μV/°C (0-100°C)