| |
The following worksheets require the use of  Mathcad software by Mathsoft, Inc. Save the file using the supplied name, then open it in Mathcad to perform the calculations. |
| |
Design
|
| |
 |
HAR-LEP.MCD (31 k Mathcad file):
This worksheet calculates the transfer curve of a Schottky diode detector (without matching circuit, zero frequency) at any temperature. It is based upon the work of Harrison & LePolozec.
|
| |
|
LARGESIG.MCD (32 k Mathcad file):
Large signal version of HAR-LEP.MCD, useful for the design of detectors which operate over the range of -15 to +20 dBm (such as AGC circuit detectors).
|
| |
|
PI_ATTN.MCD (86 k Mathcad file):
Calculates attenuation and return loss vs. bias voltage for three versions of the 4-diode Pi attenuator described in  Application Note 1048.
|
| |
|
P_DISS.MCD (25 k Mathcad file):
Calculates the junction temperature of a diode, given the ambient temperature, DC bias current, RF power dissipated in the diode, diode and package type.
|
| |
Characterization
|
| |
|
PIN_CHAR.MCD (23 k Mathcad file):
Calculates the two APLAC parameters (n and Is) from four pairs of forward V-I data. Also calculates Rs, needed to plot the V-I curve using PIN_VI.MCD.
|
| |
|
PIN_VI.MCD (22 k Mathcad file):
Plots the forward V-I curve of a PIN diode, given n, Is and Rs.
|
| |
|
SCHOTTKY.MCD (28 k Mathcad file):
Plots the V-I curve for any Schottky diode at any temperature. Calculates maximum safe current.
|
| |
|
SCH_CHAR.MCD (24 k Mathcad file):
This worksheet is used to characterize a Schottky diode (series resistance, ideality factor, saturation current), given five V-I data pairs.
|
| |
|
ZBS_CHAR.MCD (26 k Mathcad file):
Characterizes the junction resistance and junction capacitance of a zero bias Schottky diode.
|
| |
General
|
| |
|
_G_TO_Z.MCD (19 k Mathcad file):
Converts S11 or complex reflection coefficient to complex impedance.
|
| |
|
_Z_TO_G.MCD.MCD (19 k Mathcad file):
Converts complex impedance to S11 or complex reflection coefficient.
|
| |
|
R&C.MCD (33 k Mathcad file):
Calculates series or shunt resistance or capacitance, given a value of attenuation and frequency.
|
Index