Index HP noref Index HP noref
Microwave & RF Banner
  how to buy
  Index
 Markets
  Cordless
  description
 spar spec's
 
What's New   RFGlobalnet   www /go/rf   Search /go/rf
 
DECT

Digital European Cordless Telecommunications
European standard for cordless telephones

 

  lna mixer if  
  LNA Down Converter IF  
  switch pll baseband  
  T/R Switch PLL Baseband  
  pa driver mod  
  Power Amp Driver Modulator  
  Required Functions & HP Products  

HP supplies:
solid state RF components in the mobile unit and base stations


DECT Rx-LNA top

Detects and amplifiers incoming signal
[1800 MHz, NF1-2 dB, Ga 12-20 dB; <3 volt operation]

3V:
Discrete Bipolar Transistors: HBFP-0405, HBFP-0420, AT-320, AT-310, AT-305
Discrete GaAS FETs: ATF-21186
Integrated Circuits: MGA-85563, MGA-87563

HPMX-3003 includes the LNA function


DECT Rx-Down Converter top

Converts output of LNA to IF frequency
[1800 MHz to 100 MHz conversion, <3 volt operation]

3V:
IAM-91563 HPMX-5001 includes this function


DECT Rx-IF top

Low frequency amplification
[~100; <3 volt operation]

3V:
INA-30311 can be used as IF amplifier

HPMX-5002 performs IF amplification plus demodulation and data slicing


DECT T/R Switch top

provides isolation between transmit and receive paths
[1800 MHz, <3 volt operation]

HSMP-3860, HSMP-3890 PIN diodes

the HPMX-3003 includes the switch function


DECT PLL top

Provides stable carrier for frequency conversion and/or modulator
[architecture dependent, <3 volt operation]

The HPMX-5001, HPMX-5002 and HPLL-8001 chipset includes the PLL functionality Individual components: oscillator : AT-320, AT-310, AT-305

buffer : AT-320, AT-310, AT-305
INA-31063

synthesizer: HPLL-8001 (CMOS frequency synthesizer)

prescalers: no HP products

phase comparator: no HP products


DECT Baseband top

provides data inputs to modulator, converts output of IF into information

HPMX-5002 includes part of this function


DECT Tx-Power Amplifier top

amplifies outgoing signal for broadcast, sets to correct power level
[1800 MHz, <30 dBm Pout, <3 volt operation]

HPMX-3003 includes the PA function

AT-380xx, AT-420xx, ATF-21186 for power to 100 mW

MGA-83563, MGA-82563, MGA-81563

HSMS-28xx detector diodes for power control


DECT Tx-Driver top

"glue" part that amplifies modulator output sufficiently to drive power chain
[1800 MHz, 0 to 10 dBm Pout, <3 volt operation]

MGA-81563
AT-32011


DECT Tx-Modulator top

combines data with carrier
[1800 MHz, constant envelope phase modulation of moderate linearity; <3 volt operation]

The HPMX-5001 and HPMX-5002 chipset includes the modulator functionality

for systems using modulated VCO,
AT-415, AT-320, AT-310, AT-305 as oscillator

for systems using IQ modulation,
HPMX-2007



 
Bottom Banner
[(c) Copyright 1997 Hewlett-Packard Company]
[Top] [Contact us with comments]